Suzuki DF150TX 150 HP 4-Stroke Outboard, 25" Extra Long Shaft
The Suzuki DF150TX is a 150 HP four-stroke outboard with a 25-inch extra-long shaft and a 2,867 cc in-line four-cylinder DOHC engine. It has EFI with multi-stage induction, electric start, power trim and tilt, and remote steering.
Each cylinder has four valves driven by a self-adjusting, oil-bathed chain, and the engine uses solid-state electronic ignition, wet-sump lubrication with an 8.0-quart (7.6 L) oil tank and a 12V 44A alternator. The operating range is 5,000-6,000 RPM through a 2.50:1 gear ratio. The motor weighs 485 lbs, carries a CARB 3-Star Ultra-Low emissions rating, and is available in counter rotation; optional propellers are listed in pitches from 17 to 27.
Highlights
150 HP in-line 4, DOHC with 4 valves per cylinder
25" extra-long shaft, remote steering
EFI multi-stage induction, electric start
Power trim and tilt, 2.50:1 gear ratio
485 lbs, CARB 3-Star Ultra-Low rating
Counter rotation available
Specifications
Brand | Suzuki |
Model | DF150TX |
Horsepower | 150 HP |
Shaft Length | 25" (Extra Long) |
Weight | 485 lbs |
Cylinders | In-line 4 |
Valve Train | DOHC, 4 valves per cylinder, chain drive |
Displacement | 174.9 cu in (2,867 cc) |
Bore and Stroke | 3.81 x 3.81 in (97 x 97 mm) |
Operating Range | 5,000-6,000 RPM |
Fuel Induction | EFI multi-stage induction |
Starting | Electric |
Oil Capacity | 8.0 qt (7.6 L) |
Alternator | 12V 44A |
Trim | Power trim & tilt |
Gear Ratio | 2.50:1 |
Emissions Rating | CARB 3-Star Ultra-Low |
Good to know
Confirm shaft length, controls and propeller rotation against your boat before ordering, and stay within the maximum horsepower on the boat's capacity plate.
Installation, rigging and commissioning by a qualified marine technician are recommended; follow the manufacturer's pre-delivery and break-in procedures.
