Suzuki 40 HP 4 Stroke Outboard Motor, 3 Cylinder DOHC EFI, Remote
A Suzuki 40 HP four-stroke outboard with a three-cylinder DOHC 12-valve engine and multi-point sequential electronic fuel injection. It is set up for remote steering, with a tiller kit available as an option, and has electric start and power trim and tilt.
Piston displacement is 57.4 cubic inches (941 cc) with a 2.85 x 2.99 in (72.5 x 76 mm) bore and stroke, and the operating range is 5,000-6,000 RPM through a 2.27:1 gear ratio. Features include Lean Burn Control, Troll Mode, Easy Start, solid-state direct ignition, an over-rev limiter, a low oil pressure caution, a timing chain, fresh water flushing and the Suzuki Anti-Corrosion System.
The L version has a 20-inch recommended transom height and weighs 229 lbs. Oil pan capacity is 2.9 qts (2.7 L) and the alternator is rated 12V 19A.
Highlights
40 HP four-stroke, 3-cylinder DOHC 12-valve, 941 cc
Multi-point sequential EFI with Lean Burn Control
Remote steering, tiller kit optional
Electric start, power trim and tilt
Troll Mode System, 2.27:1 gear ratio
229 lbs (L), 12V 19A alternator
Specifications
Brand | Suzuki |
Horsepower | 40 HP |
Engine Type | DOHC 12-Valve |
Cylinders | 3 |
Displacement | 57.4 cu in (941 cc) |
Bore x Stroke | 2.85 x 2.99 in (72.5 x 76 mm) |
Operating Range | 5,000-6,000 RPM |
Gear Ratio | 2.27:1 |
Starting | Electric |
Steering | Remote (Tiller Kit Optional) |
Trim | Power Trim and Tilt |
Ignition | Solid State Direct Ignition |
Alternator | 12V 19A |
Oil Pan Capacity | 2.9 qts (2.7 L) |
Recommended Transom Height | L: 20" |
Weight | L: 229 lbs |
Good to know
Confirm shaft length, controls and propeller rotation against your boat before ordering, and stay within the maximum horsepower on the boat's capacity plate.
Installation, rigging and commissioning by a qualified marine technician are recommended; follow the manufacturer's pre-delivery and break-in procedures.
