top of page
SKU: MB-CT1

Suzuki 30 HP DF30ATL2 Outboard Motor, 20" Long Shaft, Remote

$1,770.00Price
Quantity

The Suzuki DF30ATL2 is a 30 HP three-cylinder remote-control outboard with battery-less electronic fuel injection and a 20-inch long shaft. It has electric start with a backup pull rope, power trim and tilt, and comes with a standard side-mount control box and harness.

The SOHC engine has four valves per cylinder, 29.8 cubic inches (489 cc) of displacement and a 2.80 x 2.68 in bore and stroke, with a full-throttle range of 5,300-6,300 RPM. Digital CDI ignition, Lean Burn Control, Easy Start, an over-rev limiter, a low oil pressure caution, fresh water flushing, a shallow water drive and the Suzuki Anti-Corrosion System are listed.

It is water-cooled and saltwater rated, burns 87-octane unleaded gasoline and uses wet-sump lubrication with SAE 10W-30 or 10W-40 oil (1.6 qts / 1.5 L). There is no internal battery; the alternator is rated 12V 14A. Included: 6 gal fuel tank, fuel line, owner's manual, aluminum propeller, tool kit, and the side-mount control box and harness.

Highlights

  • 30 HP, 3 cylinders, 489 cc, battery-less EFI

  • 20-inch long shaft, remote steering

  • Electric start with backup pull rope

  • Power trim and tilt, 2.09:1 gear ratio

  • Side-mount control box and harness included

  • Includes 6 gal tank, fuel line, aluminum prop, tool kit

Specifications

Brand

Suzuki

Model

DF30ATL2

Horsepower

30 HP

Shaft Length

20" (Long)

Steering

Remote

Starting

Electric

Trim

Power Trim & Tilt

Cylinders

3

Displacement

29.8 cu in (489 cc)

Full Throttle RPM Range

5,300-6,300

Ignition

Digital CDI

Valves per Cylinder

4

Fuel Type

Unleaded Gasoline (87 octane)

Alternator

12V 14A

Gear Ratio

2.09:1

Propeller

3 x 10.25 x 12

Weight

158 lbs

Good to know

  • Confirm shaft length, controls and propeller rotation against your boat before ordering, and stay within the maximum horsepower on the boat's capacity plate.

  • Installation, rigging and commissioning by a qualified marine technician are recommended; follow the manufacturer's pre-delivery and break-in procedures.

    bottom of page