Miller Syncrowave 210 TIG/Stick Welder Package with Spoolmate 150 (951684)

This Miller Syncrowave 210 package combines an AC/DC TIG and stick power source with a Spoolmate 150 spool gun for MIG work. It welds material up to 1/4 inch thick in a single pass and is rated up to 210 amps. Auto-Line power management accepts any input voltage hookup with no manual linking.

The front panel interface includes Pro-Set, which brings up preset weld parameters from Miller: select the DIG or Balance function and adjust until Pro-Set appears on the display. A memory card port on the front panel lets the software be upgraded and product features expanded. On 240 V input the machine reaches full welding output while drawing less than 30 amps. Built-in wheels and storage space hold the cables and accessories.

The package includes the Syncrowave 210 power source, a 10 ft (3 m) primary cord, MVP plugs for 110 V and 240 V, a 12 ft (3.8 m) 150 A TIG torch with Dinse connector, a 20 ft (6 m) Spoolmate 150 spool gun, a 12 ft (3.8 m) work cable with clamp and Dinse connector, an electrode holder with Dinse connector, an RFCS-14 foot control with 20 ft (6 m) cord, a regulator/flow gauge with gas hose, and factory-installed running gear with the EZ-Change Low Cylinder Rack.

Highlights

• AC/DC TIG, stick and MIG spool gun processes

• Welds up to 1/4 in material in a single pass

• Spoolmate 150 spool gun and RFCS-14 foot control included

• Auto-Line input hookup with no manual linking

• Pro-Set presets and memory card port for upgrades

• Running gear with EZ-Change Low Cylinder Rack

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.