Miller Multimatic 235 Multiprocess Welder w/ Running Gear (951846)

This Miller Multimatic 235 package (951846) supplies the 235-amp multiprocess inverter with its running gear/cylinder rack. It welds MIG, flux-cored, DC stick, DC Lift-Arc and pulsed DC TIG on 208 to 240 V single-phase input, weighing 63 lbs alone and 127 lbs on the cart.

Auto-Set Elite offers predefined weld settings, displayed on a 4.3-inch color LCD. The welder holds 12-inch spools, has an angled heavy-duty aluminum two-drive-roll system and two shielding gas connections. The MDX-250 MIG gun uses MDX AccuLock consumables with a front-loading liner locked at both ends. EZ-Latch latches secure the welder to the running gear and release by loosening a retaining knob for portable use.

Included: the power source with a 7 ft power cord (no plug), running gear/cylinder rack (301449), a 15 ft 250-amp MDX MIG gun with .030-.035 liner, a 10 ft work cable with electrode holder and 50 mm Dinse connector, a 10 ft work cable with clamp and 50 mm Dinse-style connector, a flow gauge regulator and gas hose for argon or AR/CO2, extra contact tips, .030/.035 in reversible drive rolls and a material thickness gauge.

Highlights

• Running gear/cylinder rack (301449) included

• 20-235A output on 208/220/230/240V single-phase input

• MIG, flux-cored, DC stick, Lift-Arc and pulsed DC TIG

• Auto-Set Elite with 4.3-inch color LCD

• 7 ft power cord, no plug included

• 63 lbs welder, 127 lbs with cart

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.