Miller Dynasty 300 CV Multiprocess Welder with CPS (907819)

The Miller Dynasty 300 CV with CPS (907819) is an AC/DC multiprocess welder for TIG, pulsed TIG, stick and air carbon arc, with a CV mode for MIG when paired with a suitcase feeder such as the ArcReach 8 or 12. It runs on 208-600V, single- or three-phase power and weighs 55 lbs.

Auto-Line accepts any input from 208 to 600 volts. Arc starts use Blue-Lightning high frequency, readings come from digital meters, and Pro-Set parameters help setup. Fan-On-Demand and Cooler-On-Demand run cooling only as needed, Wind Tunnel Technology protects the electronics, a sleep timer saves power and software updates load through a USB port. The Cooler Power Supply (CPS) provides a 120V receptacle.

AC material thickness runs 0.012 to 3/8 inch, and the largest stick electrodes are 1/4 in 6010, 7/32 in 7018 and 3/16 in 7024. Generator requirement is 12.5 kW. The suitcase feeder for MIG is not included. Supplied: Dynasty 300 power source, two 50 mm Dinse connectors, an 8 ft power cord without a plug and a user manual.

Highlights

• AC/DC TIG, pulsed TIG, stick and air carbon arc

• MIG with a paired suitcase feeder (not included)

• Auto-Line 208-600V, single or three phase

• CPS 120V cooler receptacle

• Includes two 50 mm Dinse connectors and 8 ft cord (no plug)

• 55 lbs

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.