Lincoln Ranger 305G Welder Generator with EFI (K3928-1)
The Lincoln Ranger 305G (K3928-1) is a gasoline engine-drive multi-process DC welder generator for stick, MIG, TIG, flux-cored welding and arc gouging. It is rated 305 A at 100% duty cycle and supplies 9,500 watts of continuous single-phase AC power.
DC output covers general stick, downhill pipe stick, TIG, cored wire, MIG with CO2 or mixed gas, and arc gouging. It is rated at 29 V for 300 A of stick or CV welding and runs wire up to 5/64 inch (2.0 mm). Digital amp and volt meters help preset procedures and monitor output, and Chopper Technology gives easy starts, a smooth arc and low spatter.
The Kohler gasoline engine has an electric fuel pump to avoid vapor lock at high altitude. AC voltage stays constant at 120 V or 240 V at any weld dial setting, and a skewed rotor design supplies power suitable for Lincoln Electric inverter power sources. Welding and generator outputs are rated at 104 F (40 C).
Highlights
305 A DC multi-process, 100% duty cycle at 305 A
9,500 W continuous single-phase AC power
Kohler gasoline engine with electric fuel pump
Digital amp and volt meters, Chopper Technology
CV wire welding up to 5/64 in (2.0 mm)
Specifications
Brand | Lincoln Electric |
Model | K3928-1 |
Process | Stick, MIG, TIG, Flux-Cored, Arc Gouging |
Polarity | DC |
Max Amperage Output | 305 A |
Duty Cycle | 100% at 305 A DC |
Continuous Generator Output | 9,500 W |
AC Voltage | 120 V / 240 V |
Engine | Kohler gasoline |
Max Wire Diameter | 5/64 in (2.0 mm) |
Phase | Single Phase |
Weight | 510 lbs |
Good to know
Check the input power requirements (voltage, phase and amperage) against your supply before ordering.