Lincoln Ranger 305G Welder Generator (K1726-5)
The Lincoln Ranger 305G is a gasoline engine-drive multi-process DC welder generator for stick, MIG, TIG, flux-cored welding and arc gouging. It is rated 305 A at 100% duty cycle and supplies 10,500 watts peak and 9,500 watts continuous single-phase AC power.
DC output covers general stick, downhill pipe stick, TIG, cored wire, MIG with CO2 or mixed gas, and arc gouging. It is rated at 29 V for 300 A of stick or CV welding and runs wire up to 5/64 inch (2.0 mm). Digital meters for amps and volts help preset procedures and monitor output, and Chopper Technology provides easy starts, a smooth arc and low spatter.
The 23 HP carbureted Kohler gasoline engine has an electric fuel pump to avoid vapor lock at high altitude. AC voltage stays constant at 120 V or 240 V at any weld dial setting, and a skewed rotor design supplies power suitable for Lincoln Electric inverter power sources. Outputs are rated at 104 F (40 C).
Highlights
305 A DC multi-process, 100% duty cycle at 305 A
10,500 W peak, 9,500 W continuous single-phase AC
23 HP carbureted Kohler engine with electric fuel pump
Digital amp and volt meters, Chopper Technology
CV wire welding up to 5/64 in (2.0 mm)
Specifications
Brand | Lincoln Electric |
Model | K1726-5 |
Process | Stick, MIG, TIG, Flux-Cored, Arc Gouging |
Polarity | DC |
Max Amperage Output | 305 A |
Duty Cycle | 100% at 305 A |
Generator Output | 10,500 W peak / 9,500 W continuous |
AC Voltage | 120 V / 240 V |
Engine | Kohler 23 HP gasoline, carburetor |
Max Wire Diameter | 5/64 in (2.0 mm) |
Output Rating Temperature | 104 F (40 C) |
Phase | Single Phase |
Weight | 510 lbs |
Good to know
Check the input power requirements (voltage, phase and amperage) against your supply before ordering.