Lincoln Ranger 250 GXT Welder/Generator (K2382-4)
The Lincoln Ranger 250 GXT is a gasoline engine-drive AC/DC welder generator rated 250 A at 100% duty cycle, with 11,000 watts peak and 10,000 watts continuous single-phase AC power. Its totally enclosed case has three service access doors.
AC/DC output handles a broad range of stick electrodes. AC TIG welding on aluminum and other alloys is possible with the optional TIG Module and a foot or hand Amptrol, and MIG and flux-cored welding with optional equipment. A 6-pin connector and local/remote switch allow remote control. Sound level is 76.4 dBA at 23 ft (7 m), with 100.7 dB sound power at rated output.
The 23 HP Kohler gasoline engine is a 2-cylinder, 4-cycle, overhead-valve, air-cooled unit with an electric fuel pump to prevent vapor lock and an oil drain extension. It runs from a 12-gallon tank, with an electric fuel gauge on the control panel. Welding and generator outputs are rated at 104 F (40 C).
Highlights
AC/DC welding, 250 A at 100% duty cycle
11,000 W peak, 10,000 W continuous single-phase AC
23 HP Kohler gasoline engine with electric fuel pump
6-pin connector and local/remote switch
AC TIG with optional TIG Module and Amptrol
12-gallon tank, electric fuel gauge on control panel
Specifications
Brand | Lincoln Electric |
Model | K2382-4 |
Process | Stick, MIG, TIG, Flux-Cored |
Polarity | AC/DC |
Max Amperage Output | 250 A |
Duty Cycle | 100% at 250 A AC/DC |
Generator Output | 11,000 W peak / 10,000 W continuous |
Engine | 23 HP Kohler gasoline, 2-cylinder, air-cooled |
Fuel Tank | 12 gallons |
Sound Level | 76.4 dBA at 23 ft (7 m) |
Output Rating Temperature | 104 F (40 C) |
Phase | Single Phase |
Weight | 602 lbs |
Good to know
Check the input power requirements (voltage, phase and amperage) against your supply before ordering.