Lincoln Power MIG 360MP Multiprocess Welder with Pulse (208-575V) (K4467-1)

The Lincoln Power MIG 360MP (K4467-1) is a 5-360 amp multiprocess welder with pulsed MIG and pulsed TIG, running on 208-575V single-phase, 60 Hz input. It is rated 60% duty cycle at 320 amps and uses a 7-inch color display for setup.

Pulsed MIG alternates peak and background current to control heat input and limit warping and burn-through, and allows flat, horizontal, vertical-up and overhead welding without a slag system. GMAW-P waveforms cover aluminum, carbon steel, HSLA steel, stainless and nickel alloys. Pulse-on-Pulse gives a stacked-dime bead on aluminum, and Power Mode regulates output fast for thin steel and stainless.

TIG Pulse is set by one knob over 0.5-19.5 Hz or 17.6-303 Hz, with background current at 60% of peak and on-time fixed at 50%. Further controls include run-in, preflow/postflow, arc control, a tack and spot timer, 2-step or 4-step trigger, start ramp-up, burnback control, hot start and arc force. The cabinet has two 115V front outlets, an angled gun connection, a front handle, a coil claw and a side tool holder.

Highlights

• MIG, TIG, stick, flux-cored, pulse MIG and pulse TIG

• 5-360 A output, 60% duty cycle at 320 A

• 208-575V single-phase, 60 Hz input

• 7-inch color user interface

• Two 115V front power outlets

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.