Lincoln Power MIG 360 Multiprocess Welder Aluminum Trailer MFG One-Pak (K4662-1)

The Lincoln Power MIG 360 Aluminum Trailer MFG One-Pak (K4662-1) is a 5-360 amp multiprocess welder with pulsed MIG and pulsed TIG, rated 60% duty cycle at 320 amps. It comes with a 25 ft push-pull gun, a 3/64-inch aluminum drive roll kit and a 16 lb spool of 5356 3/64 SuperGlaze wire.

Common setup runs through a 7-inch color display. Pulsed MIG switches between peak and background current to manage heat input and reduce warping and burn-through, with GMAW-P waveforms for aluminum, carbon steel, HSLA steel, stainless and nickel alloys. Pulse-on-Pulse gives a stacked-dime bead on aluminum MIG welds, and Power Mode responds quickly to arc changes on thin steel and stainless.

TIG Pulse is enabled in the advanced menu and set by a single knob over 0.5-19.5 Hz or 17.6-303 Hz, with background at 60% of peak and on-time fixed at 50%. It also offers run-in, preflow/postflow, arc control, a tack and spot timer, 2-step or 4-step trigger, an angled gun connection, two 115V front outlets, a front handle, a coil claw and a side tool holder.

Highlights

• MIG, TIG, stick, flux-cored, pulse MIG and pulse TIG

• 5-360 A output, 60% duty cycle at 320 A

• Includes 25 ft push-pull gun and 3/64 in aluminum drive roll kit

• Includes 16 lb spool of 5356 3/64 SuperGlaze wire

• 208-575V single-phase, 60 Hz input

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.