Lincoln Power MIG 215 MPI Multi-Process Welder (K4876-1)

The Lincoln Power MIG 215 MPI (K4876-1) is a single-phase, dual-input-voltage multi-process welder for MIG, flux-cored, stick and DC TIG. It handles material up to 3/8 inch with MIG and runs 5/32-inch stick electrodes for thicker work.

Setup runs through digital controls and a color display: Ready.Set.Weld recommends parameters for each procedure, ArcFX shows how settings affect the weld, and saved settings can be recalled from memory. A built-in TIG solenoid and foot pedal adapter accept a TIG torch without installation, and the case has multiple lift points. The TIG torch kit is not included; the machine is DC only, so aluminum needs the separately purchased K3269-1 spool gun.

Included: dual-voltage input cables, work cable and clamp, electrode holder and lead, adjustable gas regulator and hose, pre-installed gun with cable liner, spindle adapter, 2 lb sample spool of SuperArc L-56 mild steel MIG wire, .025-.030 and .035 in drive rolls, .030-.045 knurled drive rolls, .025-.035 and .045 in wire guides and a replacement screen shield.

Highlights

• MIG, flux-cored, stick and DC TIG capability

• Up to 3/8 in material with MIG, 5/32 in stick electrodes

• Ready.Set.Weld, ArcFX and memory settings

• Built-in TIG solenoid and foot pedal adapter

• TIG torch kit not included; K3269-1 spool gun needed for aluminum

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.