Lincoln Power MIG 140 MP Multi-Process Welder (K4498-1)
The Lincoln Power MIG 140 MP (K4498-1) is a 120V single-phase multi-process welder for MIG, flux-cored, stick and DC TIG. It is set up for MIG and stick out of the box and welds material up to 3/16 inch in a single pass.
DC TIG is limited to mild and stainless steel; aluminum work requires the SG100 spool gun (K4360-1). The TIG torch, foot control and aluminum spool gun are sold separately. Operation uses two knobs and a single process-selection button, drive rolls change without tools, a switch selects spool gun or standard MIG gun, and oversized twist connectors are used.
Included: 10 ft Magnum Pro 100L MIG gun (8-pin), 10 ft electrode holder and lead, 10 ft work clamp and lead, Harris regulator with 4.5 ft hose, 2 lb spool of .025 L56 MIG wire, 1 lb spool of .035 NR211 flux-core wire, .025 and .035 contact tips, flux-core and gas nozzles, spindle adapter for 8-inch spools and a .025-.035 dual-track drive roll.
Highlights
MIG, flux-cored, stick and DC TIG (no aluminum TIG)
120V single-phase input, 20 A draw
Welds up to 3/16 in material in a single pass
Ready for MIG and stick out of the box
TIG torch, foot control and spool gun sold separately
Specifications
Brand | Lincoln Electric |
Model | K4498-1 |
Input Power | 120 V, single phase, 20 A draw |
Output Range | MIG 30-140 A, TIG 10-120 A, Stick 25-90 A |
Duty Cycle | MIG 60% at 95 A, TIG 60% at 115 A, Stick 60% at 80 A |
Wire Feed Speed | 40-500 IPM |
Max Amperage Output | 140 A |
Polarity | DC |
Dimensions | 13.6 in H x 8.9 in W x 18.1 in L |
Materials | Mild Steel, Stainless Steel |
Good to know
Check the input power requirements (voltage, phase and amperage) against your supply before ordering.