Lincoln Aspect 230 AC/DC TIG Welder Air Cooled One-Pak (K4341-1)

The Lincoln Aspect 230 Air Cooled One-Pak (K4341-1) is a portable AC/DC TIG and stick welder rated up to 230 amps, with a 35% duty cycle at that output. It comes with a K870 foot pedal and a 25 ft air-cooled flex-head torch, and welds material up to 1/4 in thick.

The four AC waveforms are Soft Square for puddle control, Sine for a soft-sounding arc, Square for faster travel and Triangular for lower heat input on thin material. AC frequency adjusts from 40-400 Hz, AC balance from 35-99% (EN%), AC pulse from 0.1-25% and DC pulse from 0.1-2,000 PPS. Intellistart gives softer starts on thin material and hotter starts on thick material, and memory saves up to 9 welding procedures.

PowerConnect adjusts automatically to input from 120-460V at 50 or 60 Hz. Output is 2-150A on 120V and 2-230A on 208-460V, with a 60% duty cycle at 125A on 120V and at 190A on 230V. A built-in 115V Cooler Power Supply is standard, the fan runs only when needed, and Green Mode puts the machine in standby after 10 minutes of inactivity. It measures 16.5 in H x 9.7 in W x 19.9 in D.

The package includes the Aspect 230 AC/DC power source, a K870 foot pedal, a 25 ft air-cooled 26 Series TIG flex-head torch with consumables, a regulator with flow gauge and hose kit, a ground clamp set with 15 ft cable and a torch Twist Mate connector.

Highlights

• AC/DC TIG and stick, up to 230 amps

• High frequency start, four AC waveforms, pulse

• PowerConnect 120-460V, 50/60 Hz input

• 25 ft air-cooled 26 Series flex-head torch included

• K870 foot pedal and regulator kit included

• Ground clamp set with 15 ft cable included

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.