ESAB Rebel EMP 215ic Welder with Spoolgun and Foot Control (0558102240)

This ESAB Rebel EMP 215ic package (0558102240) pairs the single-phase DC MIG, flux-cored, stick and TIG welder with a 12 ft Tweco spool gun and a 15 ft remote foot control. It runs on 120V or 230V, with 5-150A on 120V and 5-240A on 230V.

sMIG arc control tracks the arc and adapts to the operator's technique. Basic mode needs only wire diameter and material thickness; Advanced mode gives full control of arc characteristics. A 4.3-inch color LCD shows settings, consumable part numbers and the user manual, and parameters can be stored. The welder takes .023-.045 in wire, handles plate up to 3/8 in and weighs 40 lbs. It is DC only and will not TIG weld aluminum.

Besides the spool gun and foot control, the package includes the power source, a 10 ft Tweco Fusion 180 MIG gun, a 13 ft Tweco 200A electrode holder, a Tweco ground clamp with leads, a spare MIG parts kit, four 6013 stick electrodes, a 2 lb 4 in spool of ESAB 70S-6 .030 wire, a Tweco TIG torch (W4013802) with accessories, a Victor argon flow gauge regulator with 12.5 ft hose, and 120V and 230V adapter plugs.

Highlights

• 12 ft Tweco spool gun included

• 15 ft remote foot control included

• MIG, flux-cored, stick and lift-arc TIG

• 120V/230V input; 5-150A (120V), 5-240A (230V)

• Wire .023-.045 in; plate up to 3/8 in

• DC only: does not TIG weld aluminum

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.