ESAB Rebel EMP 215ic MIG/Stick/TIG Welder with Foot Control (0558102240)

This ESAB Rebel EMP 215ic package (0558102240) is a single-phase DC multiprocess welder for MIG, flux-cored, stick and TIG on 120V or 230V input, supplied with a 15 ft remote foot control. Current range is 5-150A on 120V and 5-240A on 230V.

sMIG arc control tracks the arc and adapts to the operator's technique. Basic mode needs only wire diameter and material thickness, while Advanced mode gives full control of arc characteristics. A 4.3-inch color LCD shows settings, consumable part numbers and the user manual, and weld parameters can be stored. The machine takes .023-.045 in wire, welds plate up to 3/8 in and weighs 40 lbs; it is DC only and will not TIG weld aluminum.

Along with the foot control, the package includes the power source, a 10 ft Tweco Fusion 180 MIG gun, a 13 ft Tweco 200A electrode holder, a Tweco ground clamp with leads, a spare MIG parts kit, four 6013 stick electrodes, a 2 lb 4 in spool of ESAB 70S-6 .030 wire, a Tweco TIG torch (W4013802) with accessories, a Victor argon flow gauge regulator with 12.5 ft hose, and 120V and 230V adapter plugs.

Highlights

• 15 ft remote foot control included

• Tweco TIG torch, MIG gun and electrode holder included

• MIG, flux-cored, stick and lift-arc TIG

• 120V/230V input; 5-150A (120V), 5-240A (230V)

• Wire .023-.045 in; plate up to 3/8 in

• DC only: does not TIG weld aluminum

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.