ESAB Rebel EMP 215ic MIG/Stick/TIG Welder (0558102240)

The ESAB Rebel EMP 215ic (0558102240) is a single-phase DC multiprocess welder for MIG, flux-cored, stick and TIG, running on 120V or 230V with a current range of 5-150A on 120V and 5-240A on 230V. Its sMIG arc control adapts to the operator's technique.

Basic mode needs only wire diameter and material thickness, and Advanced mode gives full control of arc characteristics. A 4.3-inch color LCD displays settings, consumable part numbers and the user manual, and weld parameters can be stored. MIG mode adds voltage trim, inductance, burnback and pre/post-flow adjustment; stick mode has hot start and arc force; TIG uses lift arc. The machine takes .023-.045 in wire, welds plate up to 3/8 in and weighs 40 lbs. It is DC only and will not TIG weld aluminum.

Included are the power source, a 10 ft Tweco Fusion 180 MIG gun, a 13 ft Tweco 200A electrode holder, a Tweco ground clamp with leads, a spare MIG parts kit with contact tips and drive rolls, four 6013 stick electrodes, a 2 lb 4 in spool of ESAB 70S-6 .030 wire, a Tweco TIG torch (W4013802) with accessories, a Victor argon flow gauge regulator with 12.5 ft hose, and 120V and 230V adapter plugs.

Highlights

• MIG, flux-cored, stick and lift-arc TIG

• 120V/230V input; 5-150A (120V), 5-240A (230V)

• Tweco TIG torch, MIG gun and electrode holder included

• Wire .023-.045 in; plate up to 3/8 in

• Generator requirement 3.7 kVA (110V) or 7.5 kVA (230V)

• DC only: does not TIG weld aluminum

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.