ESAB Fabricator 141i Multi-Process Welding System (W1003141)

The ESAB Fabricator 141i (W1003141) is a 115V single-phase multi-process welder for MIG, flux-cored and stick, with a 140-amp maximum output and a weight of 32.2 lbs. TIG welding requires torch W4013802, which is not included.

MIG controls include infinite voltage control, inductance control and adjustable burnback. The metal feed plate has a two-roll drive with quick-change reversible drive rolls and a single scaled tension knob, accepts 4 in or 8 in spools and is spool gun ready. Stick mode has adjustable arc force and hot start; with the optional torch, TIG uses lift-arc starting and downslope. Digital meters with preview and hold, 4T latch trigger, a remote receptacle, tool-free polarity change, overload protection, intelligent fan control and an IP23S rating are standard.

Included are the power supply, a 10 ft Tweco Fusion 140 amp MIG gun, a Victor argon regulator with 12.5 ft hose, an electrode holder with 13 ft lead, a ground clamp with 10 ft lead, four E6013 stick electrodes, the operator's manual and CD, a 10 ft power cord with NEMA 5-20P 115V plug, a 115V 20A-to-15A adapter, a shoulder strap, .023, .030 and .035 contact tips, and drive rolls for .023/.030 solid and .030/.035 flux-cored wire.

Highlights

• MIG, flux-cored and stick; TIG with optional torch W4013802

• TIG torch not included

• 115V single-phase input, 140 A maximum output

• Duty cycle 20% at 90A, 15% at 140A

• Accepts 4 in or 8 in spools; spool gun ready

• Weighs 32.2 lbs; shoulder strap included

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.