ESAB Fabricator 141i Multi-Process System, TIG Torch & Foot Control (W1003141)

This ESAB Fabricator 141i package (W1003141) is a 115V single-phase multi-process welder for MIG, flux-cored, stick and TIG, with a 140-amp maximum output. It includes a Thermal Arc TIG torch (W4013802) and a Thermal Arc foot control (THA600285).

MIG controls include infinite voltage control, inductance control and adjustable burnback, and the metal feed plate has a two-roll drive with quick-change reversible drive rolls. The machine accepts 4 in or 8 in spools and is spool gun ready. Stick mode offers adjustable arc force and built-in hot start, and TIG uses lift-arc starting with downslope to prevent end-of-weld craters. Digital meters with preview and hold, 4T latch trigger, a remote receptacle, tool-free polarity change, overload protection, intelligent fan control and an IP23S rating are standard.

Besides the torch and foot control, the package contains the power supply, a 10 ft Tweco Fusion 140 amp MIG gun, a Victor argon regulator with 12.5 ft hose, an electrode holder with 13 ft lead, a ground clamp with 10 ft lead, four E6013 electrodes, the operator's manual and CD, a 10 ft cord with NEMA 5-20P 115V plug, a 115V 20A-to-15A adapter, a shoulder strap, three contact tips and two sets of drive rolls.

Highlights

• Thermal Arc TIG torch W4013802 and foot control included

• MIG, flux-cored, stick and lift-arc TIG

• 115V single-phase input, 140 A maximum output

• Duty cycle 20% at 90A, 15% at 140A

• Accepts 4 in or 8 in spools; spool gun ready

Specifications

Good to know

• Check the input power requirements (voltage, phase and amperage) against your supply before ordering.